two bi-color green/red leds allow for quick assessment of optical power levels and the optical trip threshold levels. additional flexibility via forced manual channel selection. two displays and adjustment pots provide viewing and adjustment of the desired optical trip threshold and actual fiber optical power levels. provides an automatic fiber switching function for redundant protection of optical signal. 1ru rack-mount enclosure with ul approved 100-240 volts ac power supply. the force model 5615 optical a/b switch provides an automatic fiber switching function for redundant protection of optical signals. each fiber?s optical signal power level is monitored, as is an adjustable optical trip threshold for each channel. if the primary fiber?s optical signal power level falls below the desired optical trip threshold, the unit automatically switches to the secondary fiber, thus eliminating the need for intervention of a system operator. returning to the primary fiber is automatic when the signal on fiber 1 is restored. the disabled path selection switch in auto mode prevents path 2 from being set at the primary fiber. additional flexibility is added via forced manual channel selection. this feature expands the functionality of the redundant unit. for example, the user could not provide unique signals to each channel and switch between each as desired. the model 5615 adds stability to many system applications, such as wdm networks, high-speed communications, and long-haul telecommunications. model 5615 optical a/b switch f orce optical broadcast systems optical a/b switch model 5615 optical a/b switch model 5615 optical a/b switch fiber out transmit end receive end model 1188 optical splitter/coupler fiber 1 in fiber 2 in model 2925 8 ch. dwdm mux rf in rf in catv tx 8 catv rx 8 catv tx 1 catv rx 1 model 2925 8 ch. dwdm dmux rf out rf out optical switching in a multichannel catv transport system force, incorporated reserves the right to make changes to the product described in this document in the interest of product imp rovement. ? 2005 by force, incorporated. all rights reserved. 825 park street, christiansburg, va 24073 ? usa (800) 732-5252 tel (540) 382-0462 fax (540) 381-0392 csr-sales@forceinc.co m www.forceinc.com
min typ max units power supply voltage 100 240 vac power supply frequency 50 60 hz fuse type 1.25 amp, slo-blo min typ max units weight 6 lbs. 2.2 kg dimensions 19.0 x 14.2 x 1.72 in. 483 x 361 x 44 mm operating temp. range +10 +40 c storage temp. range -40 +80 c humidity (rh, non-condensing) 5 90 % min typ max units optical insertion loss 2.0 db backreflection tolerance -50 db operating wavelength 1200 1610 nm optical input range +20 dbm optical trip threshold/ meter range -35 +20 dbm optical switch speed 15 ms optical characteristics* electrical characteristics* environmental and physical characteristics model 5615 front view and rear view rev. 4.1 03/11/05 *see iom5615 for complete operating specifications. optical a/b switch p/n* 5615S-SFAP 5615s-sfsp fc/apc connector sc/apc connector optical a/b switch options single-mode, 1310 nm/1550 nm specifications and ordering information specifications and ordering information 825 park street, christiansburg, va 24073 usa (800) 732-5252 tel (540) 382-0462 fax (540) 381-0392 csr-sales@forceinc.com www.forceinc.com f orce optical broadcast systems force, incorporated reserves the right to make changes to the product described in this document in the interest of product imp rovement. ? 2005 by force, incorporated. all rights reserved.
|
